What are the main functions and working principles of the brake cylinder?

The brake cylinder is a kind of device used to stop or slow down the mechanical moving parts on the automobile, and it is one of the core parts in the braking system. In the whole process of mechanical production, the performance of the continuous improvement and promotion,

12-03

2021

Driller valve manufacturer: What should be paid attention to when selecting the exhaust valve?

Driller valve manufacturer: What should be paid attention to when selecting the exhaust valve? 1. The choice of exhaust valve position is more important than the choice of diameter.

12-01

2021

The working principle of the brake cylinder braking system

Although it is as easy as anyone can do, compared with accelerating and decelerating, it is a relatively advanced knowledge. Whether it is a track or a street, the braking requirements are absolutely different.

11-25

2021

Case analysis of magnetic induction switch fault of brake cylinder

Generally speaking, the principle of the magnetic induction switch of the brake cylinder is that the cylinder is equipped with a magnet. When the brake cylinder is located in this position, the magnet provides a signal to the magnetic induction switch, so as to connect the magnetic induction switch. Then, let's understand the fault case analysis of the magnetic induction switch of the brake cylinder together.

11-19

2021

What are the working principle and structural characteristics of manual reversing valve?

Manual reversing valve is also called Chris valve, is a valve, there are a number of directions adjustable channel, can timely change the flow of fluid. This manual valve is widely used in petroleum, chemical production, more often used in synthetic ammonia, natural gas manufacturing system.

11-15

2021

What are the common fault causes and treatment methods of manual reversing valve?

Manual reversing valve is a kind of direction control valve with two or more flow forms and two or more oil areas. It is a valve to realize the communication, interception, steering, pressure unloading and sequence motion control of hydraulic oil flow. It can be divided into manual direction valve, electromagnetic direction valve, electro-hydraulic direction valve and so on.

11-09

2021

Quick discharge valve manufacturers: about the types and principles of electric ball valve introduction!

Quick discharge valve manufacturers: about the types and principles of electric ball valve introduction!As its name suggests, is to use the electric ball valve power drive valve switch, is mainly composed of two parts, the upper part is electric actuators, the lower part is the valve, in the process of industry, is used to control the water, oil, chemical liquid, etc all kinds of fluid flow and flow parameters such as temperature, pressure,

11-03

2021

Quick discharge valve manufacturer: Quick discharge valve maintenance precautions

Quick exhaust valve valve not only widely used in various fields, and using the environment also each are not identical, some valves are prone to poor working environment problem, due to the fast valve valve is an important equipment, especially some large valve, in the event of a problem needs to be repaired or replaced is quite troublesome, so, for the daily maintenance and maintenance is particularly important here, Let's learn a little about quick drain valve maintenance.

10-28

2021

What is manual reversing valve? What are the working principles and uses of manual reversing valve?

Manual reversing valve is a manual lever operated direction control valve, in the hydraulic system to reverse (change the direction of the flow) and switch (put on or cut off the flow) function. Manual reversing valve is a free choice of units, is a valve of it, with two roles.

10-25

2021

Design principle of multi-media filter

Multi-medium filter refers to the use of one or more filter media, effectively remove planktonic impurities, so that the water clarification process, commonly used filter materials are quartz sand, anthracite, manganese sand, mainly used for the removal of water treatment.

08-09

2021

About the common types of filters

Filter is an indispensable filtration device in the farm irrigation system, the impurities in the water is mainly divided into physical impurities, chemical impurities, biological organic impurities, the utility in the field, especially in the case of large areas is very necessary, in some small areas of three or two acres of drip irrigation system, see many growers currently do not have a direct installation of filtration devices,

07-21

2021

To explain to you about the principle and characteristics of circulating water filter

Nowadays, whatever we do requires consideration of recycling and environmental protection, but in the case of water, in order to achieve the purpose of recycling, the circulating water filter becomes a better choice.

07-15

2021

< 12 >