SJ2-F10 Bi-Directional Air Guide Faucet
Used in pneumatic control systems to allow compressed air to pass smoothly from the static part of the line to the rotating part.
Key words:
Category:
Pneumatic Components For Petroleum Equipment
Hotline：
Email：
SJ2-F10 Bi-Directional Air Guide Faucet
Detail
1. Characteristic:
Used in pneumatic control systems to allow compressed air to pass smoothly from the static part of the line to the rotating part.
2. Symbol:
Code Model specification Main external material Connection thread port
QY495 XJ2-F10 Die-cast aluminum P:ZG1/2" A:ZG3/8" Fig. (I)
QY516 ---- Die-cast aluminum P:ZG1/2" A:ZG3/8" Figure (2)
|
Dimension（mm） |
156*124*115 |
|
Installation Size（mm） |
（4-φ13）*φ90 |
|
Interface Size |
2-Z1/2 |
3. Technical Specification:
|
Through diameter（mm） |
10 |
|
Work stress（MPa） |
1 |
|
Effective cross-sectional area |
≥60 |
|
Maximum spindle speed (rpm) |
1000 |
|
Operating temperature（℃） |
-25～60（Note: -40℃ low temperature resistant products need special customization） |
|
Material |
Die-cast aluminum |
4. Outline and installation dimensions:
5. Notes on use.
1. grease the lubrication part once a month
2. Leakage: Cracked seal, uneven sealing surface or dirt, should be cleaned. Change the seal ring or grind the sealing surface
3. can not turn: whether there is dirt stuck or bearing inflexible should be cleaned.
Previous
SEU Series Quick Exhaust Valve
Leave us your valuable comments
* Please keep your phone open, we will contact you within 24 hours