I’ve decided to give you more surprises! So all materials enjoy a 15% discount.

00

language

    News and Information

    Consult now

    Need help? We’re here to help!

    Phone/Fax

    +86-631-5684177

    Service hotline (same number on WeChat)

    +86-15588424700


    Contact email

    whzhpc.business@whzhpc.com


    Contact Address

    No. 55 Dalian Road, High-Tech Industrial Development Zone, Weihai City, Shandong Province

    Functional Features and Advantages of the VL/O-3-1/2 Pneumatic Control Valve

    The VL/O-3-1/2 pneumatic control valve and the regulating valve cannot be used separately. Only when these two are combined can they effectively bring greater benefits and assistance to our daily lives. The VL/O-3-1/2 pneumatic control valve is increasingly prevalent in our everyday life; below, we’ll introduce some related knowledge. 1. Valve Positioners Valve positioners are essential accessories for pneumatic actuators. When used together, they enhance the positioning accuracy of valves, counteract the effects of stem friction and medium imbalances, and ensure that the valve is accurately positioned according to the signal from the controller. 2. Solenoid Valves When a system requires programmed control or two-position control, a solenoid valve must be installed. When selecting a solenoid valve, in addition to considering AC or DC power supply, voltage, and frequency, it’s also important to pay attention to its relationship with the actuation type of the control valve. Solenoid valves can be configured as either “normally open” or “normally closed.” If you need to increase the capacity to shorten the actuation time, you can connect multiple solenoid valves in parallel and use them together with a high-capacity pneumatic relay as a pilot valve. 3. Pneumatic Relays A pneumatic relay is a power amplifier that can transmit pneumatic signals over long distances, eliminating the lag caused by extended signal pipelines. It is primarily used between field transmitters and central control room control instruments, or between controllers and field control valves. Another key function of the pneumatic relay is to amplify or reduce the signal strength. 4. Transducers


       VL/O-3-1/2 Pneumatic Control Valve The control valve and the regulating valve cannot be separated. Only when the two are combined can they effectively bring greater benefits and assistance to our daily lives. The VL/O-3-1/2 pneumatic control valve is increasingly common in our everyday life; below, we’ll introduce some relevant information about it.

      1. Valve positioner

      The valve positioner is a key accessory for pneumatic actuators. When used together, it enhances the positioning accuracy of the valve, overcomes the effects of stem friction and media imbalances, and thereby ensures accurate valve positioning in response to signals from the controller.

      2. Solenoid valve

      When the system requires program control or two-position control, an solenoid valve must be equipped. When selecting a solenoid valve, in addition to considering AC and DC power supply, voltage, and frequency, it’s also important to pay attention to its relationship with the actuator type of the control valve. Solenoid valves can be configured as either “normally open” or “normally closed.” If it’s necessary to increase the capacity to shorten the actuation time, multiple solenoid valves can be connected in parallel and used in combination with a high-capacity pneumatic relay as a pilot valve.

      3. Pneumatic relay

      It is a power amplifier that can transmit pneumatic signals over long distances, effectively eliminating the lag caused by extended signal pipelines. It is primarily used between field transmitters and control instruments in the central control room, or between controllers and field control valves. Another function of this device is to amplify or attenuate the signal.

      4. Converter

      Converters are divided into pneumatic-to-electrical converters and electrical-to-pneumatic converters. Their function is to enable mutual conversion between pneumatic and electrical signals. They are primarily used when pneumatic actuators are operated by electrical signals: in such cases, a 4-20mA electrical signal is converted into a gas signal ranging from 20 to 100 Pa, and vice versa. When gas signals are used to operate electric actuators (which is relatively rare) or for centralized monitoring purposes, a gas signal ranging from 20 to 100 kPa is converted into a 4-20mA electrical signal.

      5. Valve position transmitter

      When a control valve is located far from the control room, a valve position transmitter is required to accurately determine the valve’s open and closed positions without having to go to the site. Specifically, the displacement of the valve’s actuator is converted into an electrical signal according to a predetermined pattern and transmitted to the control room. Can this signal reliably reflect the valve’s actual position? Any continuous opening signal can also be regarded as the reverse action of a valve positioner.

      The VL/O-3-1/2 pneumatic control valve can be classified into two types: air-to-open and air-to-close. In the air-to-open type, as the air pressure on the diaphragm head increases, the valve moves in the direction of increasing opening. When the input air pressure reaches its upper limit, the valve fully opens. Conversely, when the air pressure decreases, the valve moves toward closing, and when no air is supplied, it completely shuts off. Therefore, the air-to-open valve is sometimes referred to as a fail-safe shut-off valve. In the air-to-close type, the operating direction is exactly opposite to that of the air-to-open type: as the air pressure increases, the valve moves toward closing.


    Other updates


    Exploring the Role of Pneumatic Components in Oilfield Equipment: Enhancing Efficiency and Reliability

    Exploring the Role of Pneumatic Components in Oilfield Equipment Table of Contents Introduction to Pneumatic Components The Importance of Pneumatic Systems in Oilfields Types of Pneumatic Components Used in Oilfield Equipment Applications of Pneumatic Systems in Oilfield Operations Benefits of Pneumatic Components in Oilfield Equipment Challenges in Implementing Pneumatic


    Pneumatic Components for Workover Rigs vs Hydraulic A 2026 Comparison

    Image Source: statics.mylandingpages.co Hydraulic components win on power density and control precision for most heavy workover tasks. Pneumatic components win on safety in hazardous atmospheres, simplicity, and lower upfront cost in lighter-duty or remote applications. The right choice depends on rig type, environment, and task. Operators w


    Pneumatic or Hydraulic Which Is Better for Oilfield Machinery

    Image Source: statics.mylandingpages.co Hydraulic systems generally win for high-force oilfield machinery. Pneumatic systems excel in fast, clean, control-oriented duties. The hydraulic vs. pneumatics question has no single answer. The right choice depends on the machine and its duty cycle. Each criterion below ends with a clear verdict. Bot


    Pneumatic Components for Oilfield Equipment: A Worker's Story

    Image Source: statics.mylandingpages.co A worker watches a separator dump valve cycle on its own and asks, "What's telling it to do that?" A pneumatic controller uses compressed gas to sense a condition and signal a valve to act. On oilfield equipment, it holds pressure, level, or flow within a set range without electricity. These


    Reliable Pneumatic Components for Oilfield Equipment: Supporting Drilling and Workover Operations

    Pneumatic components for oilfield equipment support reliable control in drilling and workover operations.


    Complete Guide to Directional Control Valves: Types, Selection 2026

    This 2026 comprehensive guide covers all key information about directional control valves, from basic definition and working principles to practical selection and maintenance tips. Drawing on 15+ years of manufacturing and testing experience at Zhonghao Pneumatic, we share actionable insights, answer common user questions, and help you avoid costly mistakes when choosing directional control valves for your systems.


    Directional Control Valves: Complete Guide to Types, Selection & Maintenance 2026

    This comprehensive guide for engineers, procurement teams and maintenance technicians covers everything you need to know about directional control valves in 2026. Backed by hands-on testing data from Zhonghao Pneumatic, we explain definitions, classifications, selection steps, troubleshooting and answer the most common industry questions to help you make the right choice.


    Directional Control Valves 2026 Guide: Types, Selection, Maintenance Tips

    This 2026 comprehensive guide draws on decades of hands-on experience from Zhonghao Pneumatic to cover all key aspects of directional control valves, from core functions and common classifications to step-by-step selection and routine maintenance. It helps engineers, procurement teams and maintenance staff pick the right valve for their application and cut long-term operating costs.