I’ve decided to give you more surprises! So all materials enjoy a 15% discount.

00

language

    Explore and Learn: Latest Blogs

    Mature technology, reliable quality, and comprehensive services have made us a trustworthy partner in collaborations with customers both at home and abroad, while also contributing to the development of China’s pneumatic and hydraulic components industry.

    Jan 13,2023

    Precautions for Using the VL/O-3-1/2 Pneumatic Control Valve

    After installation, the VL/O-3-1/2 pneumatic control valve must undergo multiple environmental tests to confirm its proper functioning before being put into formal operation. At this stage, the interior and exterior surfaces of the main valve, as well as the suction surface, should be regularly cleaned to remove any dirt or debris; care must be taken not to damage the sealing surfaces. When the valve is not in use for an extended period, the manual valve upstream of the valve should be closed. Before restarting, the steam solenoid valve must be drained of condensate, and the valve should be subjected to several trial runs. Once it has been confirmed that the valve operates smoothly and reliably, it can be put into service. When removing the valve from the pipeline for storage, the internal components should be cleaned with compressed air and then properly stored. If, during prolonged use, the seal between the piston and the valve seat becomes ineffective, the piston sealing surface can be reground and then lapped together with the valve seat. In addition, during operation, pay close attention to the pressure gauges located upstream and downstream; the working pressure must not exceed the rated pressure, and the working pressure differential must remain within the specified range. If the working pressure exceeds the rated pressure or the working pressure differential exceeds the rated differential, immediately stop using the valve and close both the upstream and downstream manual valves to prevent potential explosions or leaks. When selecting the VL/O-3-1/2 pneumatic control valve, it is crucial to ensure its suitability. In the selection of solenoid valves, the liquid inside the valve must match the specified medium. The fluid temperature must be below the calibration temperature of the selected solenoid valve. Generally, the viscosity of the liquid should be below 20 CST; if it exceeds 20 CST, this fact must be explicitly noted. Of course, regarding the working pressure differential, when the high-pressure differential is less than 0.

    READ MORE

    Jan 03,2023

    Classification of VL/O-3-1/2 Pneumatic Control Valves

    The VL/O-3-1/2 pneumatic control valve refers to various pneumatic components used in pneumatic systems to control the pressure, flow rate, and direction of air flow, thereby ensuring the proper operation of pneumatic actuators or mechanisms. The structure of a pneumatic regulating valve can be divided into two main parts: the valve body (including the valve seat and valve port, among other components) and the valve spool. Depending on the relative positions of these two components, pneumatic control valves can be classified into normally closed and normally open types. From a structural standpoint, the VL/O-3-1/2 pneumatic control valve can be further categorized into three types: shut-off type, slide-valve type, and slide-plate type. The VL/O-3-1/2 pneumatic control valve refers to various pneumatic components used in pneumatic systems to control the pressure, flow rate, and direction of air flow, thereby ensuring the proper operation of pneumatic actuators or mechanisms. Components that control and regulate compressed-air pressure are called pressure-control valves. Components that control and regulate compressed-air flow are called flow-control valves. Components that change and control the direction of air flow are called directional-control valves. In addition to these three main categories of control valves, there are also logic elements capable of performing certain logical functions—these include fluid elements with no moving parts inside and pneumatic logic elements with moving parts. In terms of structure and operating principle, logic elements are essentially similar to directional-control valves; however, they are smaller in size and have smaller bore diameters, and are typically used to perform logical operations on signals. In recent years, with the miniaturization of pneumatic components and the increasing use of PLC control in pneumatics...

    READ MORE

    Dec 26,2022

    Composition of the VL/O-3-1/2 Pneumatic Control Valve

    The valve positioner for the VL/O-3-1/2 pneumatic control valve is a key accessory for pneumatic actuators. When used in conjunction with the actuator, it enhances the positioning accuracy of the valve, overcomes the effects of stem friction and media imbalances, and ensures accurate valve positioning in response to the regulator’s signal. When the system requires programmed control or two-position control, an solenoid valve must be installed. When selecting a solenoid valve for a pneumatic control valve, in addition to considering AC and DC power sources, voltage, and frequency, it is also important to pay attention to the relationship between the solenoid valve and the actuator’s operating mode. The solenoid valve can be configured as either normally open or normally closed. If it is necessary to increase the actuator’s capacity to shorten the response time, it can be connected in parallel with a high-capacity pneumatic relay to serve as a pilot valve. The pneumatic relay for the VL/O-3-1/2 pneumatic control valve is a power amplifier that can transmit pneumatic signals over long distances, effectively eliminating the lag caused by long signal pipelines. The VL/O-3-1/2 pneumatic control valve is primarily used between field transmitters and control instruments in central control rooms, or between controllers and field control valves. Another key function of the pneumatic relay is to amplify or attenuate signals. Its converters are divided into pneumatic-to-electric converters and electric-to-pneumatic converters. Their role is to enable mutual conversion between pneumatic and electrical signals. Specifically, when pneumatic actuators are operated by electrical signals, the converter transforms a 4–20 mA electrical signal into a 20–100 Pa pneumatic signal, and vice versa, allowing the use of pneumatic signals.

    READ MORE

    Dec 14,2022

    Introduction to the VL/O-3-1/2 Pneumatic Control Valve

    The VL/O-3-1/2 pneumatic control valve is available in two types: air-open and air-close. In the air-open type, when the air pressure on the diaphragm increases, the valve moves toward a wider opening until it reaches the maximum input air pressure, at which point it fully opens. Conversely, when the air pressure decreases, the valve moves toward closing; and when no air is supplied, the valve completely shuts off. For this reason, the air-open valve is sometimes referred to as a fail-safe shut-off valve. The air-close type operates in exactly the opposite manner: as the air pressure increases, the valve moves toward closing. The VL/O-3-1/2 pneumatic control valve, used as an air-conditioning regulating valve, is a complementary product for heating systems and is widely applied in electric water heaters, solar water heaters, and central water supply systems. It can also be used with electric water heaters and solar water heaters. Users can adjust the mixed water temperature—hot and cold—as needed. This valve quickly achieves and stabilizes the desired temperature, ensuring a constant outlet water temperature that remains unaffected by changes in water temperature, flow rate, or water pressure. It effectively solves the problem of hot-and-cold water temperature differences. When the cold water supply is interrupted, the mixing valve can automatically cut off the hot water within seconds, providing a safety protection function. The mixing port of the VL/O-3-1/2 pneumatic control valve is equipped with a thermally sensitive element. Leveraging the properties of this thermally sensitive element, the valve core inside the valve body is driven to move, thereby either blocking or opening the cold water inlet while simultaneously shutting off the cold water when the hot water is turned on. Once the temperature adjustment knob is set to a specific temperature,

    READ MORE

    Dec 05,2022

    The difference between a solenoid valve and a VL/O-3-1/2 pneumatic control valve

    An solenoid valve is a valve controlled by a coil, used in industrial control systems to regulate parameters such as the flow rate, speed, and direction of the medium. By combining it with different circuits, various control functions can be achieved, ensuring flexibility and accuracy in control. There are many types of solenoid valves, each serving a distinct purpose. The VL/O-3-1/2 pneumatic valve is controlled by a pneumatic system. Here are the key differences between the VL/O-3-1/2 pneumatic valve and a solenoid valve: 1. Switching Mode The solenoid valve is driven by a coil and operates only in an on-off manner; its switching action is brief when activated or deactivated. In contrast, the VL/O-3-1/2 pneumatic valve is controlled by a switch valve and a pressure controller. The principle behind switching the pneumatic valve is to achieve balanced flow rates among different parts of the system through online resistance and additional air supply. 2. Nature of Operation Solenoid valves generally have a small flow coefficient and operate under a small differential pressure. For example, a 25-caliber solenoid valve typically has a much smaller flow coefficient than a 15-caliber electric ball valve. Driven by an electromagnetic coil, solenoid valves are susceptible to damage from voltage surges. They essentially function like a simple switch—either fully open or fully closed. On the other hand, the spool of the VL/O-3-1/2 pneumatic valve moves axially along the valve seat to control the intake and exhaust of air. Once the working air pressure is applied to the valve port, the spool is pressed against the valve seat by the combined action of a spring and the air pressure, preventing compressed air from escaping through the valve port. 3. Application

    READ MORE

    Nov 24,2022

    Advantages of the VL/O-3-1/2 Pneumatic Control Valve

    The VL/O-3-1/2 pneumatic control valve is widely used in various industrial production environments. One major drawback is that it requires a compressed air source for actuation, meaning it cannot be used when the electric valve is open. However, under certain operating conditions, it remains irreplaceable. Advantages of the VL/O-3-1/2 pneumatic control valve: - The opening and closing speed is adjustable; - The structure is simple and easy to maintain. - Thanks to the inherent buffering properties of gas, the valve is less likely to get jammed or damaged, making it more reliable than electric valves in certain explosion-proof applications. - Since pneumatic valves contain no electronic components, even if a failure occurs while conveying flammable or explosive media, no sparks will be generated by the electronic parts, thus eliminating safety hazards in hazardous environments. - The VL/O-3-1/2 pneumatic control valve also features a fault-reset function. When selecting the valve, users can choose between normally-open or normally-closed configurations based on their specific application requirements. In the event of a compressed air supply failure, the valve can automatically return to either the fully open or fully closed position according to the pipeline’s safety requirements—something that ordinary electric valves cannot achieve. Additionally, pneumatic valves are generally cheaper than comparable electric valves. Key features and advantages of the VL/O-3-1/2 pneumatic control valve include: - It can be used to cut off or connect media flow in pipelines, as well as to control and regulate fluid flow. - Compared with other valve types, pneumatic ball valves offer advantages such as angular stroke torque output, fast opening speed, stable and reliable performance, and wide-ranging applicability.

    READ MORE

    < 1...949596...104 >